LED 155

Marine LED Light for Buoys and Minor Beacons

LED 155 is a general purpose LED lantern commonly used on both fixed and floating structures. The lantern is modular in design. It can be configured with two different vertical divergences and 1-3 tiers depending on operational requirements.

Range up to 8 NM @ Tc=0.74 and12 NM @ Tc=0.85
Standard IALA colors Red, Green, White, Yellow and Blue/Yellow
Rugged aluminum housing for installation in harsh marine environments
Extremely low power consumption, suitable for solar and battery operation
Integrated flasher with daylight switch and solar charger
Integrated solar panel charger using Pulse Width Modulation
Adjustable intensity and range
Available with narrow (6°) or wide (10°) vertical divergence
Programming with wireless Sabik PDA Programmer
Integrated event log for 365 days
Optional integrated GPS synchronization
Optional integrated GSM Remote monitoring

Bird Spikes
Stainless steel as standard. Easy to replace. Special spikes available for protection against large birds.

GPS
GPS unit and antenna integrated in the lantern for wireless synchronization and position monitoring.

Light Guard GSM
GSM unit and antenna integrated in the lantern for remote monitoring and control.

Additional Cable Entry
Equipped as standard with two cable entries. If the second entry is needed e.g. for a solar module standard M20 cable gland can be fitted.

PDA Programmer
Wireless two way infrared communication with Sabik PDA Programmer to set Flash code, range, photocell, switch level etc. The event log data is also readable with the Programmer.

Installation
The bottom plate supports installation on structure with three 7/16" bolts on a 200 mm radius. The mounting holes are galvanic isolated with plastic isolators. PTFE vent for pressure release.

OFBS
The optional Optical Feedback System (OFBS) enables built-in monitoring of LED degradation over time.

Simplex

Duplex

Triplex

White

Red

Green

Yellow